Motorola SB4200 - Manual (Page 46)

41 X
Home Print Exit
Introduction Before You Begin Installation Configuration Troubleshooting Legal
Removing the USB Driver from
Windows 98
The SB4200 USB Driver Removal windows are displayed on this page.
3 Click Remove Driver.
4 The removal of the SB4200 USB is now complete.
You may get various messages in this step, depending on the previous
installation. The status messages you receive are informational only.
5 After you have removed the USB device, repeat the Windows 98 USB Installation
procedure to reinstall the SB4200 with a USB device.
If you have problems, please contact your service provider.