Configuring for tcp/ip in windows 2000 – Motorola SB4200 User Manual

Page 31

Advertising
background image

X

Home

Print

Exit

Introduction

Before You Begin

Installation

Configuration

Troubleshooting

Legal

26

Configuring for TCP/IP in Windows 2000

The following basic instructions are for Windows 2000 users. Windows 95, 98, and Me
instructions begin on page 23. If you are using a different operating system, refer to your
user guide.

1

On the Windows Desktop, click Start.

2

Select Settings and then Control Panel from the pop-up menus.

3

Double-click the Network and Dial-up Connections icon on the Control Panel
window.

4

On the Network and Dial-up Connections window, click Local Area Connection #.
The value of this number (#) varies from system to system, but usually is 2. The
Local Area Connection # Status window is displayed as shown at the top of the next
page.

Advertising