Meridian America 598 - Manual (Page 63)

Setting up the DVD player
56
Use this output To connect to this
AUX DIGITAL OUT A surround processor such as the
Meridian 561 Digital Surround
Processor, a digital preamplifier such as
the Meridian 562V, or Meridian DSP
loudspeakers.
SMART LINK A surround processor such as the 568.2
DIGITAL OUT Digital Surround Processor with a MHR
Smart Link input.
Analogue version
Use this output To connect to this
ANALOGUE OUT A multi-channel analogue output from a
DVD Audio player or projector.
AUX DIGITAL OUT A surround processor such as the
Meridian 561 Digital Surround
Processor, a digital preamplifier such as
the Meridian 562V, or Meridian DSP
loudspeakers.
The digital connections should be made with high quality 75
Ω
screened cable. Suitable cables are available from Meridian. We
do not recommend using audio cables which do not have
adequate shielding or the correct impedance, or cables intended
for UHF applications, as these do not provide adequate
shielding in the 1–30MHz region.
The MHR Smart Link connection can be made with an SVGA
computer monitor lead, available from PC dealers. A Smart Link
cable is supplied with the 568.2. The analogue connections
should be made with high-quality phono leads.
Communications connections
The following table gives details of the communications
connections:
Use this connection To connect to this
COMMS Other Meridian 500 series
equipment, or Meridian DSP
loudspeakers.
RS232 connection For future expansion, to allow the
598 to be interfaced to a
computer. Contact your dealer for
more information.