Configuring the 598 dvd audio player, Configuration options – Meridian America 598 User Manual
Page 70
Configuring the DVD player
63
Configuring the 598 DVD Audio Player
To configure specific options
●
Highlight Meridian setup in the Setup menu, and press
Enter.
The Meridian setup menu will be displayed:
To set configuration options
The configuration options are generally set to an appropriate
value when you reset the 598 to the standard settings, and you
should not normally need to alter them; see Choosing standard
The options are summarised in the following table for advanced
use:
Option
Default
Description
Diagnostics
No
Set to Yes for a diagnostic
display on the front panel
display.
System address
1
Set to a value from 1 to 8.
Product address
1
Set to a value from 1 to 8.
Controller
Auto
Specifies whether the DVD
player is controller, not
controller, or set automatically.
Start source
DVD
Specifies which source is
selected when switching on from
standby.
Vol display
No
Specifies whether the DVD
player displays the volume for
the system.
Fan
As
Set to Always to keep the fan
required
permanently on, or As required
to use it when necessary.
Source config
Allows you to configure the
sources; see below.