Meridian America 598 - Manual (Page 66)

Setting up the DVD player
59
To connect to a processor with
analogue multi-channel inputs
(analogue version)
Surround Processor 598 DVD Audio Player
ANALOGUE
OUTPUTS
6 x Phono leads
ANALOGUE
OUTPUTS DIGITAL
OUTPUT
DIGITAL
INPUT
Digital lead
● Connect the ANALOGUE OUT sockets from the 598 DVD
Audio Player to the analogue multi-channel inputs on the
surround processor.
● Optionally connect the AUX DIGITAL OUT socket to the
surround processor’s digital input, using a digital phono lead.
This gives you the option of decoding Dolby Digital and DTS
bitstreams using the surround processor.
To connect to two Meridian DSP
loudspeakers
L/R
COMMS
OUTPUT INPUT
DIGITAL
OUTPUT
DIGITAL INPUTS
2 1
COMMS
OUTPUT INPUT
DIGITAL
OUTPUT
DIGITAL INPUTS
2 1
M5 lead
S5 lead
DSP5000 – Main R (slave) DSP5000 – Main L (master)
598 DVD Audio Player
COMMS
● Connect the L/R output (digital version) or the AUX digital
output (analogue version) from the 598 DVD Audio Player to
DIGITAL INPUT 1 on the master DSP loudspeaker.
● Connect the DIGITAL and COMMS output from the master
DSP loudspeaker to the DIGITAL and COMMS INPUTS on the
slave DSP loudspeaker, using an S5 lead.
● In the Decode bitstream in player menu set the Main outputs
option to Yes; see To select the digital audio format, page 46.
● Set the Multichannel menu options to No; see To enable the
multi-channel outputs, page 48.