Microsoft MN-130 - Manual (Page 15)

3
setting up.
Installing, Connecting, and
Configuring Your Adapter
Your Microsoft ® Broadband Networking Ethernet adapter can be set
up in various ways, depending on how your existing network is
configured. The instructions in this chapter will guide you through
the process of setting up your adapter.
Before You Begin
Before you install your PCI adapter, make sure that you have the
following items at the computer:
Included in the Box:
O Microsoft Broadband Networking PCI Adapter
O User’s Guide
O Setup CD-ROM
Also Required (but not included in the box):
O Ethernet cable
O System documentation from your computer’s manufacturer
Optional:
O Network settings provided by your Internet service provider
(ISP). You might need this information during setup, depending
on how you install and configure your adapter.
O Microsoft Windows ® Setup CD-ROM. This might be necessary if
you need to install any additional Windows networking
components during setup and configuration.
O A Wake-On-LAN cable. This optional cable is purchased
separately and is necessary only if you want to use the Wake-
On-LAN feature on an older computer. For more information,
see Chapter 1.