Microsoft ET180 - Manual (Page 14)

F i r s t t h i n g s f i r s t
Preparing to use your ET180
xiv
To recharge the device using the AC adapter cord:
When travelling you can still recharge your device and avoid the bulk of carrying the
cradle by using the AC adapter cord to directly connect to a power outlet.
1 Plug the AC adapter into any AC current outlet.
2 Connect the AC adapter cord to the universal connector of your device.
Setting up your ET180
After you have initially charged your device for about 4 hours, you can now set it up for
use. Refer to the instructions below.
NOTE: Make sure that the SIM card holder is close before turning on the device.
To set up your ET180
1 Turn on your device by pressing the power button on the front panel.