Microsoft ET180 - Manual (Page 25)

1 G e t t i n g t o k n o w y o u r E T 1 8 0
ET180 tour
5
Using the backlight
If lighting conditions make it difficult for you to see the information on your device, use
the backlight to illuminate your screen.
You can change the backlight settings. Refer to "Brightness" on page 100.
To activate the backlight:
• Press the power button and hold it down for about two seconds. Release
the button when the backlight turns on.
To turn off the backlight:
• Press the power button and hold it down for two seconds. Release the
button when the backlight turns off.
Using the SD/MMC slot
Your device has an expansion slot compatible with a range of SD and MMC storage
cards, which are primarily used to back up or transfer files and data.
To insert a storage card:
• Hold your device securely, then push the card into the slot until you hear an
audible system sound; this will signal that the card is already properly
seated within the slot.
The card is secure when it is not protruding from the base.
•
14 Send button • When there’s an incoming call, press
to accept the call.
• During an ongoing call, press and hold to
toggle on/off the speakerphone mode.
• From Speed Dial, press to call the
currently selected number.
• From Call Log, press to call the
currently selected log item.
• In mailbox, press to send a composed
email/SMS message or display options
for a received email/SMS.
• From a PDA application, press to
display the Dialer screen or press
twice to redial the last called number.
15 Speaker Listen to audio media or a phone call from here.
1 You need to install an appropriate driver to your device before using a peripheral device.
No. Component Description