Micron Technology Transport LT - Manual (Page 154)

Power Cord Requirement Appendix A - Regulatory
154
Notes:
* Flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm² conductor
size. Power cord set fittings (appliance coupler and wall plug) must bear the
certification mark of the agency responsible for evaluation in the country where it
will be used.
* * Flexible cord must be Type SVT or equivalent, No.18 AWG. Wall plug must be
a two-pole grounding type.
* * * Appliance coupler, flexible cord, and wall plug must bear a "T" mark and
registration number in accordance with the Japanese Dentori Law. Flexible cord
must be Type VCT or VCTF, 3-conductor, 0.75 mm² conductor size. Wall plug
must be a two-pole grounding type with a Japanese Industrial Standard C8303
(15 A, 125V) configuration.
Sweden SEMKO *
Switzerland SEV *
United kingdom BSI *
United States UL * *