Using the flex-bay – Micron Technology Transport LT User Manual
Page 33
Using the Flex-Bay
Introducing Your TransPort LT
33
If your computer’s Operating System is Windows 98 or Windows 2000, you can
use the USB port. The Windows NT 4.0 Operating System does not support USB.
Using the Flex-Bay
Your computer includes the Flex-Bay, a peripheral bay that can hold one of the
following devices:
•
Floppy disk drive
•
CD-ROM drive: shipped with some computers and also available as an
option.
•
DVD-ROM: shipped with some computers and also available as an option.
•
Optional secondary battery: available as an option for your computer.
•
LS-120: available as an option.
Parallel port:
Plug a parallel device, such as a parallel printer or
network adapter, into this 25-pin port.
Video port:
Plug the interface cable of an external monitor into this
15-pin connector and then plug the monitor power cord into a
grounded outlet.
USB (universal serial bus) port:
Connect USB devices to this port.
USB input/output devices include keyboards, pointing devices,
monitors and external FDD module.
Modem jack:
Connect a telephone line to connect to the Internet or
send/receive faxes, see “Using the Modem” on page 46 for more
information.
Port Replicator:
Connect a port replicator (Optional) to this
connector. See ”Port Replicator” on page 68 for more information.