Micron Technology Transport LT - Manual (Page 46)

Using the Modem Introducing Your TransPort LT
46
• The battery temperature is below 41° F (5° C) or over 95° F (35° C). If you
think the battery temperature is too hot or too cold, turn off the computer,
remove the battery, and let the battery reach room temperature. Then try
charging the battery again.
• The battery is defective. Replace the battery with a new battery.
Using the Modem
All TransPort LT notebooks ship with an internal modem installed. The
combination Modem/NIC is optional.
Precautions Before Use
N OTE : The Transport LT Modem with a PCI interface does not support DOS mode. You
can use DOS box in Windows 98 instead of pure DOS mode.
W ARNING : If you connect the modem to the digital key-phone line, the modem will be
damaged.
Using the modem on a PBX system
(Key-phone system) If you use a simple terminal program you should type ATX3&W or ATX3
command as an initialization command.
If you use a Windows Communication Program follow the instructions below.
1. Click the Start button and then point to Settings.
2. Click Control Panel.
3. Double-click the Modems icon and the click Properties button at the General
tab.
4. Check the Wait for dial tone before dialing check box at the Connection
tab.