Micron Technology Transport LT - Manual (Page 87)

Boot Menu Using System Setup
87
Boot Menu The Boot menu enables you to select a boot device and set boot options.
Resume
Time: hh:mm:ss Specifies the time for your computer to automatically
resume from rest mode. Enter two-digit numbers to
indicate the hour, minutes, and seconds in the format
hh:mm:ss . Use a 24-hour clock . Use the tab key to move
between the hour, minute, and second cells. Use the
hyphen key [-] or [Space] bar to decrease or increase the
numbers.
You must set this option if you enable Resume On Time.
Speedstep
Mode: Selects the mode of Intel Speedstep support to install in
the user BIOS at runtime. If your CPU does not support
Intel Speedstep, this field should be set to Disabled.
TABLE 16. (Continued) Power Menu
Feature Option Description
TABLE 17. Boot Menu
Feature Option Description
Screen Logo
Display: Enabled
Disabled Enables or Disables the display of the boot time logo. If
you select Disabled, the diagnostic POST screen is
displayed during boot.
Summary
screen: Enabled
Disabled Displays the system configuration when the computer
starts. The options are Enabled and Disabled
(default).
Boot Device
Priority: Default:
1.Diskette
Drive,
2.Removable
Devices,
3.Hard Drive,
4.DVD/CD-
ROM Enables you to select the order in which the computer
attempts to boot from different devices. The field has three
options: Diskette Drive
, Removable Devices , Hard
Drive , and DVD-CD ROM.
To choose a device as the first, second, or third boot
device:
1. Press [Enter] at the Boot Device Priority field.
2. Press [Enter] at the plus(+) symbol to display sub
menu.
3. Highlight the option with the [Up Arrow] or [Down
Arrow] key.
4. Press the [Space] bar until the option moves up or
down in the list of options
5. Press [Esc] to return to the Boot menu.