Motorola XTNID - Manual (Page 27)

25 English
BATTERIE
S
AN
D
CHAR
GER
S
5. Adjust the removable bracket for battery type, if
necessary.
6. Insert the radio or battery into the charging
pocket.
Notes:
• This Multi-Unit Charger will also allow you to
clone up to 3 radios (3 "Source" radios and 3
"Target" radios).
• When cloning, the MUC does not need to be
plugged into a power source, but all radios
require charged batteries. Further details on
MUC’s operation are explained in the Instruc-
tions Sheet provided with the MUC. Please
refer to the Accessories section in order to
identify the part number for ordering the MUC.
Notes:
• This Multi-Unit Charger will also allow you to
clone up to 3 radios (3 "Source" radios and 3
"Target" radios).
• When cloning, the MUC does not need to be
plugged into a power source, but all radios
require charged batteries. Further details on how
to clone units are explained in the Instructions
Sheet provided with the MUC. Refer to the
“Accessories” section in order to identify the part
number for ordering the MUC.
Detailed information is available with the MUC
operation instructions leaflet.
* Normally reseating the battery pack will correct the issue.
MUC LED Indicator
Status LED Status Comments
Charging
Steady Red
Indication
The charger is currently
charging
Charge
Complete
Steady Green
Indication
Battery is fully charged
Battery Fault
(*)
Red Fast
Blinking
Battery had a fault when
battery was inserted