Motorola XTNID - Manual (Page 36)

34 English
GETTING S
T
ARTED
• long press the PTT button to save and exit or
• turn OFF radio to exit without saving changes.
When there is no activity for more than ten
seconds, MENU mode will time out.
Setting VOX / iVOX sensitivity
The VOX/iVOX sensitivity can be adjusted
via the MENU as well as the CPS. To modify
via the MENU, first make sure you have
enabled either VOX or iVOX. (See page 31).
Once VOX/iVOX has been enabled, short
press MENU.
If you have iVOX enabled and press MENU,
your radio will display the following:
If you have VOX enabled (with accessory
connected) and press MENU, your radio will
display the following:
To change the sensitivity level, use the /
buttons:
0 = OFF (For VOX accessories only)
1 = Low sensitivity (suitable for noisy
environments)
2 = Medium sensitivity
3 = High sensitivity (suitable for quiet
environments)
Once you have selected the value you want,
press MENU again to go to the next step or
turn OFF radio to exit without saving changes.
IVO
X
IVO
X