Motorola XTNID - Manual (Page 44)

42 English
PR
OGRAMMING FEATURES
button until you reach the ‘Max Channel
Programming Mode’:.
The radio display will blink the current
maximum number of channels programmed.
To program the maximum number of channels
use the
/ buttons until you locate
the desired setting. Long press the PTT button
to save and exit.
Note: The value settings available are dependent
upon the maximum number of channels the
radio supports.
PROGRAMMING CALL TONES
Call Tones will enable you to transmit to other
radios in your group in such way that you can
alert them that you are about to talk or alert
them without speaking.
In ‘Call Tone Selection Mode’, you can
configure the call tone type for the radio. The
settings available will depend on the maximum
number of call tones your radio supports.
To program call tones, enter ’Programming
Mode’ and scroll through the programming
options until your display radio shows the
Programming Call Tones selection:
The current call tone setting will be blinking.
You can select the desired call tone value
(0,1,2 or 3) by pressing the
/
MA
X
CH
TONE