Motorola XTNID - Manual (Page 49)

47 English
PROG
RAMM
ING
FEATUR
ES
and lower case, press the A button. Note
that the supported lower case characters
are: b, c, d, g, h, i, l, o, r, u.
• Pressing the C button will allow you to
insert special characters and numbers in
the following order: 0 - 9 * {}? &%. + / - _ ' ' \.
Character ' ' is a space character.
Long press the PTT button to save and go
back to the ‘Channel Aliasing Selection Mode’
to choose other channel to edit the alias name
or exit without saving changes by turning OFF
the radio.
Note:
• If the channel alias name is left blank, the
radio will play a bad key chirp and will stay
in the editing menu mode until the channel
name is edited and saved.
• When editing the channel alias name, if the
radio is left idle after 3 seconds, the radio
will accept the existing character and
advance the cursor one space to the right.
NUISANCE CHANNEL DELETE
Nuisance Channel Delete allows you to
temporarily remove channels from the "Scan
List". This feature is useful when irrelevant
conversations on a "nuisance" channel tie up
your radio's scanning features. To delete a
channel from the scan list:
• Start "Scan Mode" by short pressing the
SB2 button (*)
• Wait until the radio stops on the channel
you wish to eliminate, then long press the
SB2 button to delete it.
• The channel will be removed until you exit
"Scan Mode" by pressing the SB2 button
again or if radio is turned OFF.
Note: (*)Assumes the SB2 button is not
programmed to another function different
from the default.