Motorola XTNID - Manual (Page 34)

32 English
GETTING S
T
ARTED
Hands Free without Accessories (iVOX)
• Enable iVOX by pressing the PTT button while
turning the radio ON and the
• iVOX operation can be temporarily disabled by
pressing the PTT button.
• A short press of PTT will re-enable iVOX.
Note:
• The iVOX feature is available only on display
models RDU2080d, RDV2080d.
• To learn how to set VOX/iVOX sensitivity levels
please refer ahead to "Menu Options" in this
same section.
• There is a short delay between when you start
talking and when the radio transmits.To learn
how to set VOX/iVOX sensitivity levels, please
refer to " “MENU Options” on page 33".
• Note: The iVOX feature is available only on
display models XTNiD.
Battery Save
Battery Save feature extends the battery life as
your radio goes into "idle" state each time
there is no radio activity. To enable/disable,
press SB1 and SB2 buttons simultaneously for
2 or 3 seconds while powering up the radio
until you hear a quick series of beeps. To have
a slightly better attack time, set “Battery Save”
feature to OFF so that the radio is always
ready to transmit or receive without any delays.
Note: Battery Save feature is set to ON by default
Reset To Factory Defaults
Reset to Factory Defaults will set back all radio
features to the original factory default settings.
To do so, press PTT, SB2 and SB1
simultaneously while turning ON the radio until
you hear a high tone chirp beep.
will blink.