Madrigal Imaging MP-9 - Manual (Page 105)

Section 5
Specifications
5.1 Specifications MP-8 and MP-9
Note: Due to constant research, specifications are subject to change without notice.
Optics
➤
❑ High definition hybrid lens
❑ Optical resolution of 10 line pairs per mm
❑ 8"(MP-8) and 9"(MP-9) electromagnetic focus CRTs
❑ Scheimpflug adjustment for top, bottom, and side-to-side focus
❑ Liquid coupling for optimized contrast ratio (MP-9 only)
Resolution
➤
❑ 2500 x 2000 addressability
❑ 1500 x 1200 ANSI pixels for MP-9, 1350 x 1100 for MP-8
Brightness
➤
❑ Usable light output per industry standard:
160 ANSI lumens for MP-9, 200 ANSI lumens for MP-8
Display
➤
❑ Electronic geometry circuits separately correct top, bottom and sides
for flat, curved or rear screens up to 25 feet diagonal
❑ Keystone circuitry to correct pictures for angles greater than ±15°
vertically from screen axis (dependent on throw distance)
❑ Color temperature adjustment for precise setup
❑ S and C vertical and horizontal linearity
❑ Adjustable top, bottom and side blanking
❑ 9 zone electronic astigmatism correction (service adjustment)
Input Signals
➤
❑ RGB Video Input Level: 0.5 to 1.0 volts p-p, 75
Ω ±1% terminated
❑ Automatically switches to separate sync, composite sync, or sync on green
❑ Separate or composite syncs are automatically accepted in either polarity
❑ 1.0 volts nominal audio input level
❑ Sync on green: max horizontal frequency is 130 kHz
❑ Sync input level: 0.3 to 5.0 volts p-p, 75
Ω ±1% terminated
5.1