Installation with an existing router – Motorola VT2442 User Manual
Page 13
VT2442 Voice Gateway User Guide
7
Configuration: Basic Advanced TCP/IP
Wireless
Installation With an Existing Router
1
Unplug your cable or DSL modem power cord or adapter.
2
Unplug your router power cord or adapter. Please leave your modem and router connected to the cable or
phone line that provides your Internet connection.
3
Disconnect one computer from your router.
4
Connect one end of the blue Ethernet cable to an Ethernet port on your router.
5
Connect the other end of the blue Ethernet cable to the blue Ethernet port labeled Internet on the rear panel
of your voice gateway.
6
Connect one end of the yellow Ethernet cable to the Ethernet 1 port on your voice gateway.
7
Connect the other end of the yellow Ethernet cable to the Ethernet port on the computer you disconnected in
step 3.
A
You must connect a phone
to the Phone 1 port
Optional phone or fax machine
for a second line from Vonage
Cable or DSL modem
Internet
Existing router
Computer to configure
the VT2442
To AC
power