Motorola VT2442 - Manual (Page 28)

Overview Installation Troubleshooting Contact FAQ Glossary License
Configuration: Basic Advanced TCP/IP Wireless
VT2442 Voice Gateway User Guide 22
Advanced Configuration
This section describes the ADVANCED , TOOLS , and STATUS menus.
ADVANCED
The ADVANCED menu provides the following links:
• UPnP — enable Universal Plug and Play
•
IP QoS — assign priority to Internet traffic
• Port Forwarding — direct incoming traffic to specific computers on your network
• IP Filters — block applications and services based on the IP address of a LAN device
• LAN Clients — determine how computers on your network receive an IP address
•
Web Filters — specify whether proxies, cookies, Java applets, ActiveX controls, or pop-ups can pass through
your voice gateway
• Dynamic DNS Client — register your voice gateway with a DNS server to access the voice gateway each
time from the WAN using the host name
• Multicast — enable IGMP Multicast
• Static Routing — define up to 16 static routes in the voice gateway routing table
• Dynamic Routing — define dynamic routes using routing information protocol (RIP)
•
Remote Web Access — enable access to the voice gateway remotely over the Web
• Remote SSH Access — access the voice gateway remotely via secure shell
• Ethernet Switch — configure Ethernet switch settings