Motorola VT2442 - Manual (Page 26)

VT2442 Voice Gateway User Guide 20
Overview Installation Troubleshooting Contact FAQ Glossary License
Configuration: Basic Advanced TCP/IP Wireless
LAN Configuration
If DHCP is enabled on all of the computers on your home network (LAN), you should not need to change any of
the default LAN settings. For information about enabling DHCP, see
“Configuring TCP/IP” on page 53.
Unless you have sufficient networking knowledge, we recommend not changing any LAN settings.
LAN Configuration fields and buttons
Field or Button Description
Subnet IP Address Sets your LAN subnetwork IP address in dotted-decimal format . We recommend not changing
the default 192.168.15.0.
Netmask Sets the VT2442 subnet mask , in dotted-decimal format. The default is 255.255.255.0, which
enables the VT2442 router to support up 253 users connected through multiple hubs, switches,
routers, or wireless access points.
Default Gateway Sets the default gateway IP address for your network, in dotted-decimal format. It must be in the
range for the subnet specified by Subnet IP Address and Netmask. We recommend not
changing the default 192.168.15.1.
Host Name Sets the voice gateway host name. It can contain any alphanumeric characters, except spaces.
Domain Sets the domain name. It is used in conjunction with the host name to uniquely identify the voice
gateway. To access the web pages of the voice gateway you can type 192.168.15.1 (the IP
address) or mygateway1.rgw (hostmame.domain).