Motorola VT2442 User Manual
Page 73
VT2442 Voice Gateway User Guide
67
Configuration: Basic Advanced TCP/IP
Wireless
5
Disconnect any cables connecting your computers to the router.
6
Connect one end of the blue Ethernet cable to the Ethernet port on your modem.
7
Connect the other end of the blue Ethernet cable to the blue Ethernet port labeled Internet on the rear panel
of your voice gateway.
8
Connect one end of the yellow Ethernet cable to the Ethernet 1 port on your voice gateway.
9
Connect the other end of the yellow Ethernet cable to the Ethernet port on one computer.
10
Connect your other computers.
11
Continue with step 8 in
“Installation With a Standard Modem”
If you connect the VT2442 directly to your cable or DSL modem, it can prioritize voice calls over data
traffic to help ensure high-quality phone service.
Hint: If you add more than four computers, you can connect your old router or a hub to one of Ethernet
ports 2, 3, or 4 on the VT2442 and connect your remaining computers to the router or hub. Be sure
only one
server is running on your network. For more information, see