Microtek Artix Scan1100 - Manual (Page 13)

ArtixScan 1100 Hardware User’s Guide 9
English
C. Installing the software
Install all the software in your Artix CD-ROM.
To do this, insert the Artix CD-ROM into your CD-ROM
drive. When the CD-ROM icon appears on your
Macintosh desktop, open the software folders individu-
ally, then double-click the Installer icon on each folder
to install the respective programs one at a time.
3. Termination
A terminator is included in your scanner package and
should be installed on your scanner in the following
situations:
• If the scanner is the only SCSI device in your SCSI
chain; or
• If you are daisy chaining the scanner with other
SCSI devices AND the scanner is the last device in
your SCSI chain.
Normally, a terminator is not required is when the
scanner is part of a daisy chain and is NOT the last
device in the SCSI chain.
To install the terminator, plug it into
the SCSI port at the back of the
scanner (beside the cable connecting
the scanner to the computer).