Microtek Artix Scan1100 - Manual (Page 19)

ArtixScan 1100 Hardware User’s Guide 15
English
7. When installation is complete, Windows will ask if
you wish to shut down your computer. Select No.
8. Click Start, Settings, and select Control Panel.
9. Double-click on the System icon in Control Panel
and select Device Manager from the top.
10. Double-click on “SCSI controllers” to check
whether conflict happens. If a conflict exists, follow
the steps in Resolving Situation B.
11. When the settings are all correct, click OK to save the
modifications. The dialog box should now show the
correct Interrupt Request, Memory Range, and Input/
Output address settings. If you are asked to shut
down your computer, select
No, then click Close.
You will be asked whether you wish to restart your
computer. Click
Yes and restart your computer.