Microtek Artix Scan1100 - Manual (Page 23)

ArtixScan 1100 Hardware User’s Guide 19
English
2. Positioning transparent film
This procedure applies when you use the lower scan bed of the ArtixScan 1100, which has a transparency tray that is
used for scanning transparent film.
There are two ways to scan transparent film: 1) By using the Universal Glass Film Holder; or 2) By using the Main
Holder with the various other holders also included in your scanner package. See below for more details.
Using the Universal Glass Film Holder
Use the Universal Glass Film Holder together with the
transparency tray when you wish to scan non-standard-
sized transparent film.
Using the Main Holder with other film holders
Use the Main Holder with other film holders for
scanning a particular type of standard-sized film. For
instance, use the 4” x 5” Film Holder to scan 4” x 5”
film, or use the 35mm Filmstrip Holder to scan 35mm
filmstrips.
Universal
Glass Film
Holder
4” x 5” Film Holder 6x9 cm Film Holder
35mm Slide Holder 35mm Filmstrip Holder
Main Holder