Microtek Artix Scan1100 - Manual (Page 22)

18 ArtixScan 1100 Hardware User’s Guide
English
6 Operating the Scanner
This section provides information on how to operate the ArtixScan 1100. The subjects covered in this section include
how to position your images for scanning and how to use the various holders included in your scanner package when
scanning transparent film.
1. Positioning reflective materials
This procedure applies when you use the upper scan bed of the ArtixScan 1100. The upper scan bed is used for
scanning reflective materials such as photos and prints.
A. General scanning
1. Lift the scanner lid.
2. Place the image to be scanned face down on the
scanner glass. Center the top of the image at the “0”
position along the horizontal ruler on the scanner.
Then lower the scanner lid.
A
B. Scanning thick documents
To scan thick documents, lift the scanner lid high
enough so that there is room to place the document on
the scanner glass. Then lower the scanner lid.
“0” mark is in the
middle of the
horizontal ruler