Moxa Technologies Moxa EtherDevice Switch EDS-508 - Manual (Page 23)

EDS-508 Series User’s Manual Featured Functions
3-7
Network
The Network configuration allows users to modify the usual TCP/IP network parameters. An
explanation of each configuration item is given below.
Auto IP Configuration
Setting Descriptions Factory Default
Disable
To set up MOXA EtherDevice Switch’s
IP address manually.
By DHCP
To have MOXA EtherDevice Switch’s IP
address assigned automatically by your
network’s DHCP server.
By BootP
To have MOXA EtherDevice Switch’s IP
address automatically assigned by your
network’s BootP server.
Disable
Switch IP Address
Setting Descriptions Factory Default
IP Address of the
EDS To identify MOXA EtherDevice Switch
on a TCP/IP network.
192.168.127.253
Switch Subnet Mask
Setting Descriptions Factory Default
Subnet mask of
the EDS
To identify the type of network MOXA
EtherDevice Switch is connected to. Enter
255.255.0.0 for a Class B network, or
255.255.255.0 for a Class C network.
255.255.255.0
Default Gateway
Setting Descriptions Factory Default
Default Gateway
of the EDS Enter your router’s IP address if your
LAN connects to an outside network.
None