Moxa Technologies Moxa EtherDevice Switch EDS-508 - Manual (Page 31)

EDS-508 Series User’s Manual Featured Functions
3-15
Configuring SNMP
SNMP Read/Write Settings
The following figures indicate which SNMP parameters can be configured. A more detailed
explanation of each parameter is given below the figure
SNMP Versions
Setting Descriptions Factory Default
V1, V2c, V3
Select SNMP Versions V1, V2c, V3
protocol to manage the switch
V1, V2c
Select SNMP Versions V1, V2c protocol
to manage the switch
V3 only
Select SNMP Versions V3 protocol only
to manage the switch
V1, V2c
V1, V2c Read Community
Setting Descriptions Factory Default
V1, V2c Read
Community
Use a community string match for
authentication, which means that the
SNMP agent accesses all objects with
read-only permissions using the
community string public.
public
Maximum 30
characters
V1, V2c Read/Write Community
Setting Descriptions Factory Default
V1, V2c
Read/Write
Community
Uses a community string match for
authentication, which means that SNMP
servers access all objects with read/write
permissions using the community string
private.
private
Maximum 30 characters
For SNMP V3, there are two levels of privilege for different accounts to access the EDS. Admin
privilege allows access and authorized to read and write MIB file. User privilege only allows
reading MIB file, but not authorized to write