Moxa Technologies Moxa EtherDevice Switch EDS-508 - Manual (Page 62)

EDS-508 Series User’s Manual Featured Functions
3-46
Rate of Medium Priority Queue
Setting Description Factory Default
The same or
double rate of
Normal priority
queue
Set the threshold of traffic of limited packets in
EDS’s medium priority queue.
8M
Rate of High Priority Queue
Setting Description Factory Default
The same or
double rate of
medium priority
queue
Set the threshold of traffic of limited packets in
EDS’s High priority queue.
8M
NOTE By default, EDS is configured to limit broadcast packets not to exceed 8M to protect against
broadcast storms caused by careless usage. Can be adjusted by the user.
Egress Rate
Setting Description Factory Default
No Limit / 128K /
256K / 512K /
1M / 2M /
4M/8M
Set the threshold of EDS’s egress packets. None
Using Port Lock
The EDS-508 series can configure protected static MAC addresses to a specific port. With the Port
Lock function, these locked ports will not learn any more addresses, but only allow the traffic
coming from preset static MAC addresses, thus helping to block unwanted invasion or careless
usage.
Adding a Static Unicast MAC Address