Motorola SBG940 - Manual (Page 15)

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
SBG940 User Guide 7
Rear Panel
The rear panel provides cabling connectors, status lights, and the power receptacle:
Key Item Description
1 An adjustable, but non-removable antenna. Do not attempt to force this antenna off the unit.
2 Use any Ethernet port to connect an Ethernet LAN cable with RJ-45 connectors to an
Ethernet-equipped computer, hub, bridge, switch or Xbox or PlayStation
® 2 gaming console.
3 For Windows only, use the USB port for Connecting a PC to the USB Port . You cannot connect the
SBG940 USB port to a Macintosh or UNIX
®
computer.
4 RESET If you experience a problem, you can push this recessed button to restart the SBG940 (see
“
Troubleshooting ”). To reset all values to their defaults, hold down the button for more than five
seconds . Resetting may take 5 to 30 minutes because the SBG940 must find and lock on the
appropriate communications channels.
5 Use the cable connector to connect to the coaxial cable outlet.
6 Removable, adjustable antenna. If necessary, contact your cable provider about obtaining an optional
Motorola wireless
high gain antenna to increase WLAN performance and coverage.
7 Use the AC connector to connect to the AC power outlet.
2 3 4 5 6 7 1