Motorola SBG940 - Manual (Page 98)

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
SBG940 User Guide 90
Setting Up a USB Driver in Windows 98 Second Edition
1 Insert the SBG940 Installation CD-ROM in the CD-ROM drive. This CD contains the USB drivers and must be
inserted and read by the PC before you connect the SBG940 to the PC.
2 Connect the USB cable as shown in USB Connection .
A few seconds after you complete the USB connection, the Add New Hardware Wizard window is displayed:
3 Click Next. The following window is displayed:
4 Be sure “Search for the best driver for your device” is selected.