Configuring a wireless client for wpa, Configuring a wireless client for wep, Elds, see – Motorola SBG940 User Manual

Page 86: Essid), Rform, Broadcast, you must perform, On al, Caution

Advertising
background image

Overview

Installation

Troubleshooting

Contact

FAQ

Specifications Glossary

License

Configuration: Basic Gateway TCP/IP Wireless USB

SBG940 User Guide

78

Configuring a Wireless Client for WPA

If you enabled WPA and set a PSK Passphrase by

Configuring WPA on the SBG940

, you must configure the

same passphrase (key) on each wireless client. The SBG940 cannot authenticate a client if:

WPA is enabled on the SBG940 but not on the client

The client passphrase does not match the SBG940 PSK Passphrase

For information about the WPA support in Windows XP, visit:

You can download the Microsoft Windows XP Support Patch for Wi-Fi Protected Access from

http://www.microsoft.com/downloads/details.aspx?FamilyId=009D8425-CE2B-47A4-ABEC-274845DC9E91&disp
laylang=en

Configuring a Wireless Client for WEP

If you enabled WEP and set a key by

Configuring WEP on the SBG940

, you must configure the same WEP key on

each wireless client. The SBG940 cannot authenticate a client if:

Shared Key Authentication is enabled on the SBG940 but not on the client

The client WEP key does not match the SBG940 WEP key

On a WLAN client equipped with a Motorola wireless adapter, you can enter the WEP Passphrase you set when
you configured the SBG940. For all other wireless adapters, you must enter the 64-bit or 128-bit WEP key
generated by the SBG940.

Configuring a Wireless Client with the Network Name (ESSID)

To distinguish it from other nearby WLANs, you can identify your WLAN with a unique network name (also known
as a network identifier or ESSID). When prompted for the network identifier, network name, or ESSID, type the
name set in the ESSID field on the

Wireless > NETWORK Page

in the SBG940 Setup Program. For more

information, see “

Configuring the Wireless Network Name on the SBG940

”.

After you specify the network name, many wireless cards or adapters automatically scan for an

access point such

as the SBG940 and the proper channel and data rate. If your card requires you to manually start scanning for an

access point, do so following the instructions in the documentation supplied with the card.

WPA Wireless Security for Home Networks

http://www.microsoft.com/WindowsXP/expertzone/columns/
bowman/03july28.asp

Overview of the WPA Wireless Security Update in
Windows XP

http://support.microsoft.com/?kbid=815485

Caution!

Never provide the PSK Passphrase to anyone who is not authorized to use your WLAN.

Caution!

Never provide the WEP key to anyone who is not authorized to use your WLAN.

Advertising