Motorola SBG940 - Manual (Page 53)

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
SBG940 User Guide 45
Gateway > LAN — dhcp server config Page
Only experienced network administrators should use this page to perform advanced DHCP server configuration:
CAUTION!
Do not modify these settings unless you are an experienced network administrator with strong
knowledge of IP addressing, subnetting, and DHCP.
Gateway > LAN — dhcp server config page fields
Field Description
LAN IP Address You can type the IP address of the SBG940 for your private LAN. The default is
192.168.0.1.
LAN IP Subnet Mask Displays the subnet mask in dotted-decimal format. The default is 255.255.255.0.
Starting IP Address Enter the starting IP address to be assigned by the SBG940 DHCP server to clients in
dotted-decimal format. The default is 192.168.0.2.
# of DHCP Users Sets the number of clients for the SBG940 DHCP server to assign a private IP address.
There are 253 possible client addresses. The default is 253.
DHCP Server Lease Time Sets the time in seconds that the SBG940 DHCP server leases an IP address to a client.
The default is 3600 seconds (60 minutes).
Domain Name Sets the domain name for the SBG940 LAN. The default is None.
Time To Live Sets the TTL (hop limit) for outbound packets. The default is 64.
Interface Maximum
Transmission Unit Sets the SBG940 LAN MTU in bytes. The minimum is 68 bytes. The default is 1500 bytes.
Apply Click to apply your changes. You must reboot the SBG940.