Motorola SBG940 - Manual (Page 18)

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
SBG940 User Guide 10
Wired Ethernet LAN
Each computer on the 10/100Base-T Ethernet LAN requires an Ethernet network interface card ( NIC ) and driver
software installed. Because the SBG940 Ethernet port supports auto-MDIX , you can use straight-through or
cross-over cable to connect a hub, switch, or computer. Use category 5 cabling for all Ethernet connections.
The physical wiring arrangement has no connection to the logical network allocation of IP addresses.
Sample Ethernet to computer connection
Coaxial
cable
Category 5 Ethernet cable
SBG940
To AC
power