Motorola SBG940 User Manual
Page 73
Configuration: Basic Gateway TCP/IP Wireless USB
SBG940 User Guide
65
Verifying the IP Address in Windows 2000 or Windows XP
To check the IP address:
1
On the Windows Desktop, click Start.
2
Select Run. The Run window is displayed.
3
Type cmd and click OK to display a command prompt window.
4
Type ipconfig and press
ENTER
to display the IP configuration. A display similar to the following indicates a
normal configuration:
If an Autoconfiguration IP Address is displayed as in the following window, there is an incorrect connection
between the PC and the SBG940 or there are cable network problems. Check the cable connections and
determine if you can view cable-TV channels on your television:
After verifying the cable connections and proper cable-TV operation, renew the IP address.