Motorola SB4100 - Manual (Page 19)

Configuring for TCP/IP
10 Click TCP/IP on the Network window.
If you have more than one TCP/IP
entry, choose the one associated with
the Ethernet card or USB device connected
to the SB4100.
11 Click Properties.
12 Select the IP Address tab on the
TCP/IP window.
13 Click Obtain an IP address automatically.
14 Click OK to accept the TCP/IP settings.
15 Click OK to close the Network window.
16 Click OK when a prompt to restart your
computer is displayed and then click OK
again.
Introduction Before You Begin Installation Operation Basic Configuration Troubleshooting
14
SSUURRFFbbooaarrdd
R
TM