Motorola SB4100 - Manual (Page 21)

Installing USB Device Drivers
3 Click CD-ROM drive and Specify a location.
4 Click Browse.
5 Select your CD drive and USB drivers.
Example: D:\USB DEVICE DRIVERS
6 Click Next to load the USB drivers.
7 Click Next to install the driver on the
location displayed.
8
Insert your Microsoft Operating CD when
prompted, if the operating system is not
installed on the hard drive.
or
Click Next at the prompt, if the operating
system is loaded on the hard drive.
9 Click Yes to reset your computer and
finish setting up the new hardware.
Introduction Before You Begin Installation Operation Basic Configuration Troubleshooting
15
SSUURRFFbbooaarrdd
R
TM