Motorola SB4100 - Manual (Page 8)

Rear Panel
The rear panel provides connectors for cabling, status lights, and power plug.
Item Description
1
LINK/ACT When the light is on, the Ethernet connection is available. A blinking light indicates
data is being transferred.
2
This port is the Ethernet connector that transfers data to and from your computer.
3
100 The light is on when a 100Base-T link is established and off when a 10Base-T link
is established.
4
USB This port provides a direct connection to USB equipped computers.
5
This is the recessed reset button.
6
CABLE This port transfers data to and from the service provider.
7
POWER This connector provides power to the SB4100.
Introduction Before You Begin Installation Operation Basic Configuration Troubleshooting
1
2
3
4
6
5
7
3
SSUURRFFbbooaarrdd
R
TM