Motorola SB4100 - Manual (Page 9)

SB4100D Rear Panel
The SB4100D rear panel provides connectors for cabling, status lights, and power plug.
Item Description
1
This connector is for the internal telephone modem.
2
LINK/ACT When the light is on, the Ethernet connection is available. A blinking light indicates
data is being transferred.
3
This port is the Ethernet connector that transfers data to and from your computer.
4
100 The light is on when a 100Base-T link is established and off when a 10Base-T link
is established.
5
USB This port provides a direct connection to USB equipped computers.
6
This is the recessed reset button.
7
CABLE This port transfers data to and from the service provider.
8
POWER This connector provides power to the SB4100.
Introduction Before You Begin Installation Operation Basic Configuration Troubleshooting
2
4
3 5
7
6
8
1
4
SSUURRFFbbooaarrdd
R
TM