Mercedes-Benz Command 209 - Manual (Page 150)

142
Navigation
Destination input
Selecting a route mode P
1 Route calculated for optimum driving
time
2 Route calculated for optimum driving
route
̈ Turn the right-hand rotary/push-button
v to highlight the desired route mode
and press to confirm.
Including P or avoiding Q traffic rou-
tes, several selections are available
3 Calculate the route with/without free-
ways
4 Calculate the route with/without ferry
connections, car trains
5 Calculate the route with/without toll
roads
6 COMAND calculates the route with the
selected settings
̈ Turn the right-hand rotary/push-button
v to highlight the desired type of road
and press the button.
Calculating the route
̈ Press the right-hand rotary/push-
button
v longer than 2 seconds.
or
̈ Turn the right-hand rotary/push-button
v to highlight “OK” and press to con-
firm.
As soon as calculation begins, you will
see a corresponding message and hear
the voice output “The route is being
calculated”.
i
Toll roads appear in green on the map.
i
In the event that no reasonable alterna-
te route for that destination exists,
COMAND will calculate the route inclu-
ding 3 to 5 even if these selections are
to be avoided.