Mercedes-Benz Command 209 - Manual (Page 93)

85
Telephone
Telephone operation
Dialing a number from the phone book
Dialing using the multifunction steering
wheel
In order to use this feature, the phone
book must have previously been downloa-
ded to the COMAND memory. This is per-
formed automatically each time the
portable phone is connected to the coiled
cord.
The telephone is ready for operation
(
୴ page 78).
̈ Press E or H as often as neces-
sary until the telephone mode appears
in the multifunction display.
If ENTER CODE appears, enter your unlock
code first ( ୴ page 78).
The message NO ENTRY appears when the
portable phone has been put into the crad-
le and no entries are stored in the phone
book.
̈ Press F or G.
You are paging the phone book back-
wards or forwards in alphabetical or-
der. Name and memory location
appear.
or
̈ Press F or G longer than 2 se-
conds.
You are scrolling through the phone
book very quickly.
The name that is selected appears in
the display.
i
If you do not wish to place a call, press
L. The process will be cancelled and
the message
READY appears again.