Mercedes-Benz Command 209 - Manual (Page 189)

181
Navigation
Settings
In order to ensure an exact fix on position,
you have to calibrate COMAND by entering
the correct tire information whenever tires
are changed.
̈ Turn the right-hand rotary/push-button
v to highlight “Settings” in the main
destination input menu and press to
confirm.
A list of options will appear.
Menu “Settings”
1 Activate menu “Calibration”
̈ Turn the right-hand rotary/push-button
v to highlight 1 and press to confirm.
The menu “Calibration” will appear.
2 Enter the tread depth and the tire type
3 Return to the main destination input
menu
̈ Press the right-hand rotary/push-
button
v to start calibration.
A list of options will appear.
Calibration
i
Mercedes-Benz recommends that you
have tires changed by an authorized
Mercedes-Benz Center.