Mercedes-Benz Command 209 - Manual (Page 71)

63
Audio
Sound settings
Sound settings
COMAND is equipped with a standard am-
plifier.
You can set
ț the sound Bass/Treble individually
ț the sound-center (Fader and Balance)
ț select predefined sound optimization.
See individual audio mode descriptions for
instructions on this feature.
Adjustments to the sound have a different
effect on the audio and service sources.
The predefined sound optimizations are
available for the audio sources only.
Audio sources include:
ț Radio FM, AM, WB
ț CD (CD drive, CD changer)
ț auxiliary audio source, e.g. tape deck (if
connected)
You can activate the main Sound menu in
the audio sources through the menu field
“Sound”.
Service sources include:
ț Telephone
ț Voice output in the navigation
ț Voice recognition system
See separate operating instructions for te-
lephone and voice recognition system.
You can activate the main Sound menu in
the “NAVI Settings” menu (
୴ page 181),
through the menu field “Sound”.
Activating the main sound menu
For audio sources
Main sound menu
1 Radio (FM) is switched on
2 Actual sound settings (Bass/Treble)
3 Actual sound-center (Fader and Balan-
ce)
4 Slider switch to alter the value
5 Reset Bass/Treble to “0”, and the Ba-
lance to the middle of the vehicle
6 Activate predefined sound optimizati-
ons
Adjusting sound settings