Mercedes-Benz Command 209 - Manual (Page 198)

190
Info Services/System settings
System settings
You can select the following languages
ț “Adopt from Instrument Cluster”
COMAND will use the same language
as is set in instrument cluster
ț “Deutsch”
ț “English” (metric)
Distance measured in km,
speed in km/h
ț “English” (imperial)
Distance measured in yards and miles,
speed in miles per hour (mph)
ț “Español”
ț “Français”
ț “Italiano”
ț “Nederlands”
COMAND is equipped with an integrated
clock, which it shows in the main system
settings menu.
Automatically
COMAND automatically sets date and time
if the GPS time is received.
However, you can make the following ad-
justments:
ț Set the time in increments of 30 minu-
tes (
୴ page 191)
ț Set the time by selecting a country and
the time zone (
୴ page 192)
Manually
You must always set the clock manually
(
୴ page 195), if
ț COMAND does not receive a GPS time
ț the clock has been disconnected from
the vehicle battery
ț the dates of the change between sum-
mer and winter time are not available
Setting date and time
i
The clock displays e.g. the estimated
time of arrival at the destination during
route guidance.