Motorola 2200 - Manual (Page 116)

Administrator’s Handbook
116
Status Indicator Lights
The first step in troubleshooting is to check the status indicator lights (LEDs) in the order outlined in the
following section.
The first step in troubleshooting is to check the status indicator lights (LEDs) in the order outlined
below.
Motorola Netopia® Router 2210 status indicator lights
LED Action
Power
Solid Green = Power on; Off = Power off; Flashing Red =
Power On/Self Test; Solid Red = PO/ST Failure
Ethernet
Solid green = Device connected; Off = No device con-
nected or modem power is off
DSL
Solid green = DSL synch; Off = Modem power off; Flash-
ing green = DSL attempting synch; Flashing green / red
= DSL fails to synch 3 times; Flashing red = No DSL sig-
nal
Internet
Solid green = Connected to Internet; Off = Bridge mode
or modem power is off; Flashing green = Attempting
PPP connection; Red = Connection failed
Power Ethernet DSL Internet