Ip_address, X.x.x.x, Y-y-y-y-y-y – Motorola 2200 User Manual
Page 154: Name
Administrator’s Handbook
154
set dhcp range [ 2... 8 ] start-address
ip_address
Specifies the star ting IP address of DHCP range
n when subnet n option is on. See
.
set dhcp range [ 2... 8 ] end-address
ip_address
Specifies the ending IP address of DHCP range
n when subnet n option is on. See
.
set dhcp reserved ip-address
x.x.x.x
mac-address
y-y-y-y-y-y
If you selected
server
, reser ves the specified IP address from the DHCP pool to the specified MAC
address. These are list items; a total of 16 reser ved addresses are suppor ted. Secondar y ranges will
all make use of the
dhcp lease-time
value.
DHCP Generic Options
Beginning with Firmware Version 7.7.2, you can specify DHCP Generic Options which allow you to config-
ure the content to be ser ved for par ticular option numbers.
set dhcp gen-option name
name
Specifies a DHCP generic option set named name of one to 15 characters. You can specify up to 20
gen-options. Each can contain up to 100 bytes of data, up to a maximum of 912 bytes of options data
total. An option will be ser ved only if the client requests it.
set dhcp gen-option option [ 1 – 255 ]
Specifies the DHCP option by number, 1 – 255. The following table shows the formats and sizes for
known options, and whether or not you can configure a
gen-option of that type.
Option
Data Format
Data Size
(bytes)
Can
Configure
0
Empty
0
No
1
IP mask
4
Yes
2
Unsigned 4 byte integer
4
Yes
3 - 11
IP address list
Multiples of 4
Yes
12
String (up to 100 characters)
N
Yes
13
Unsigned 2 byte integer
2
Yes
14 - 15
String (up to 100 characters)
N
Yes
16
Unsigned 4 byte integer
4
Yes
17
String (up to 100 characters)
N
Yes
18
String (up to 100 characters)
N
Yes
19 - 20
Flag
1
Yes
21
IP address & mask list
Multiples of 8
Yes
22
Unsigned 2 byte integer
2
Yes
23
Unsigned 1 byte integer
1
Yes