Snmp settings – Motorola 2200 User Manual

Page 209

Advertising
background image

209

SNMP Settings

The Simple Network Management Protocol (SNMP) lets a network administrator monitor problems on a
network by retrieving settings on remote network devices. The network administrator typically runs an
SNMP management station program on a local host to obtain information from an SNMP agent such as
the Motorola Netopia® Gateway.

set snmp community read

name

Adds the specified name to the list of communities associated with the Motorola Netopia® Gateway. By
default, the Motorola Netopia® Gateway is associated with the public community.

set snmp community write

name

Adds the specified name to the list of communities associated with the Motorola Netopia® Gateway.

set snmp community trap

name

Adds the specified name to the list of communities associated with the Motorola Netopia® Gateway.

set snmp trap ip-traps

ip-address

Identifies the destination for SNMP trap messages. The ip-address argument is the IP address of
the host acting as an SNMP console.

set snmp sysgroup contact

contact_info

Identifies the system contact, such as the name, phone number, beeper number, or email address of
the person responsible for the Motorola Netopia® Gateway. You can enter up to 255 characters for the
contact_info

argument. You must put the contact_info argument in double-quotes if it contains

embedded spaces.

set snmp sysgroup location

location_info

Identifies the location, such as the building, floor, or room number, of the Motorola Netopia® Gateway.
You can enter up to 255 characters for the location_info argument. You must put the
location_info

argument in double-quotes if it contains embedded spaces.

SNMP Notify Type Settings

set snmp notify type [ v1-trap | v2-trap | inform ]

Sets the type of SNMP notifications that the system will generate:

v1-trap – This selection will generate notifications containing an SNMPv1 Trap Protocol Data Unit

(PDU)

v2-trap – This selection will generate notifications containing an SNMPv2 Trap PDU
inform – This selection will generate notifications containing an SNMPv2 InformRequest PDU.

Advertising