Maxtor DIAMONDMAX 91536H2 - Manual (Page 10)

PRODUCT DESCRIPTION
2 – 1
SECTION 2
Product Description
Maxtor DiamondMax ® 60 AT disk drives are 1-inch high, 3.5-inch diameter random access storage devices which
incorporate an on-board ATA-5/Ultra DMA 100 controller. High capacity is achieved by a balanced combination
of high areal recording density and the latest data encoding and servo techniques.
Maxtor's latest advancements in electronic packaging and integration methods have lowered the drive's power
consumption and increased its reliability. Advanced giant magneto-resistive read/write heads and a state-of-the-art
head/disk assembly - using an integrated motor/spindle design - allow up to four disks in a 3.5-inch package.
Exceptionally high data transfer rates, 5,400 RPM spin speed and < 9.0 ms access times make these performance
series disk drives especially well-suited to high-end desktop and server applications.
DiamondMax 60 Key Features
ANSI ATA-5 compliant PIO Mode 4 interface (Enhanced IDE)
Supports Ultra DMA Mode 4 for up to 100 MB/sec data transfers
2 MB buffer with multi-adaptive cache manager
5,400 RPM spin speed
< 9.0 ms seek time
Zone density and I.D.-less recording
Outstanding shock resistance at 250 Gs
High durability with 50K contact start/stop cycles
Advanced multi-burst on-the-fly Error Correction Code (ECC)
Extended data integrity with ECC protected data and fault tolerant servo synchronization fields
Supports EPA Energy Star Standards (Green PC Friendly) with ATA powering savings commands
Auto park and lock actuator mechanism
Low power consumption
S.M.A.R.T. Capability
Note: Maxtor defines one megabyte as 10 6 or one million bytes and one gigabyte as 10 9 or one billion bytes.