Maxtor DIAMONDMAX 91536H2 - Manual (Page 41)

INTERFACE COMMANDS
7 – 1
SECTION 7
Interface Commands
The following section describes the commands (and any parameters necessary to execute them),
as well as Status and Error register bits affected.
Read Commands
Read Sector(s)
Read Verify Sector(s)
Read Sector Buffer
Read DMA
Multi-word DMA
Ultra DMA
Read Multiple
Set Multiple
Write Commands
Write Sector(s)
Write Verify Sector(s)
Write Sector Buffer
Write DMA
Multi-word DMA
Ultra DMA
Write Multiple
Mode Set/Check Commands
Set Features Mode
Set Multiple Mode
Set Max Mode
Read Native Max Address
Power Mode Commands
Standby Immediate
Idle Immediate
Standby
Idle
Check Power Mode
Set Sleep Mode
Initialization Commands
Identify Drive
Initialize Drive Parameters
S.M.A.R.T.