Motorola PCS telephone - Manual (Page 24)

Making and Receiving Phone Calls 22
Conference Calling
With conference calling, you can join up to five other parties to
create a group call.
A Conference calling is a network feature. Please contact your
Service Provider for availability information.
Setting Up a Conference Call
To set up a conference call, place or receive a call as you normally
would. Once the call is established, press M and scroll to
Make
New Call . Press O to select.
You will then be prompted for the phone number of the next
party. You can either enter the number with the keypad or recall a
number from your Phone Book via the Quick Access Menu.
The original call will be placed on hold automatically while you
make the new call. Once the new call is established, you can join
the calls by pressing M and selecting
Conference Call .
You may also add incoming calls by answering Call Waiting and
selecting
Conference Call as described above.
Simply repeat these steps to include additional calls.
Separating Out Individual Calls
If you need to speak with an individual caller privately, you can
isolate one call from the conference call.
A In order to separate a call from the group, there must not be
any calls already on hold.
To isolate the call, press M and select Split Call . You will
then be able to scroll through the phone numbers of all the
members of the conference call. If you have stored any of the
numbers in your Phone Book, the name will also appear. Once
you find the caller to isolate, press O.
To re-join the group, select Conference Call again.
Ending the Call
Close the phone to end all calls simultaneously.
Press M then scroll to either End Active Call to disconnect
your live call or End Held Call to disconnect whoever is on
hold, whether an individual or the remaining group.